How to make a wall-mounted wooden herb rack

94% of 100%
Plants and herbs are cool! This plant box is easy to make and it looks fabulous full of herbs on your kitchen wall or full of plants on the garden wall.
  1. Step 1: Measure and saw off three 20x20cm squares.
  2. Step 2: Saw the squares diagonally so you have six triangles.
  3. Tip

    Guiderails are available for sawing oblique or long pieces. You can clamp the plank and saw along the guiderail.
  4. Step 3: Saw three planks of 20x40cm for the front.
  5. Step 4: Mark off drill holes on the back board and drill them with a thin wood drill bit. Mark off these holes on the wall too (using a spirit level). Drill the holes and insert the plugs.
  6. Step 5: Screw all sides to the back wall. Start with the lower triangles and work upwards.
  7. Step 6: Add wood glue to the front planks and place them on the sides. Screw the corners tight to increase the sturdiness.
  8. Step 7: Cut plastic to size with the (cordless) shears and lay it in the trays so that the water does not run off when the plants are watered.
  9. Step 8: Screw to the wall and fill with plants.


Rate this step-by-step instruction.

How to make a wall-mounted wooden herb rack

4.7 of 5

9 total

  • 5
  • 4
  • 3
  • 2
  • 1